304 Quality Stainless Steel Construction for rest
316 Quality Stainless Steel Construction for working area
Large single-compartment sink with rapid and positive drainage.
Spray hose assembly
Hydro Aspirator
Heavy-duty commercial Waste Disposer with the controller
Hot and cold water fixture with convenient goose-neck faucet and wristblade handles.
FVS Formalin Dispensing Device has been shipped to Spain!
SOLUTION FOR SECURE MANAGEMENT OF
HISTOLOGICAL SAMPLES FROM THE OPERATING
ROOM TO THE PATHOLOGICAL ANATOMY
LABORATORY
Safe filling of sample buckets with formalin
Activation of the pump by Foot Pedal
Ventilated, closed and illuminated distribution enclosure
Variation of the ventilation according to the the operators request
through the Fan Speed Controller
Ventilated storage cupboard for formaldehyde canisters or
cubitainers with sliding shelves such as retention bins
Recovery tank under the perforated tray in case of accidental
spillage, connected to a recovery canister
Built-in carbon filter for aldehydes, optional HEPA filter
Active suction during all phases of use of the instrument
Manual Lighted Button Controller for Fan, Light Operations
Connection tapping for discharge to the outside above the device D
200 mm
Duct or Recirculated Models
Equipped with a filter for formaldehyde and an extractor in the upper
part
No specific consumables required
Ease of use
Ease of installation and maintenance
Small footprint W 900 x D 750 x H 2100 mm
Grossing Workstation SENTA, DEKOPATH SERIES has been shipped to DUBAI, UAE.
Grossing Workstation SENTA, DEKOPATH SERIES has been shipped to DUBAI, UAE.
FormolSafe® | Automated Formalin Dispensing Device
Secure Dosage and Filling of Formalin for Operating Theaters and Pathological Anatomy Laboratories!
SOLUTION FOR SECURE MANAGEMENT OF HISTOLOGICAL SAMPLES FROM THE OPERATING ROOM TO THE PATHOLOGICAL ANATOMY LABORATORY
THE PROBLEM
Formaldehyde recognized as a category 1B carcinogen based on European regulation N605/2014. Work with formalin concerns operators in the operating room, pathological anatomy laboratories and sample transport.
THE IMPERATIVES
Perfectly preserve biological samples to allow correct diagnosis and all subsequent biomolecular investigations.
Protect operators from exposure to formalin vapors
THE SOLUTION
STAHLMED LABORATORY SYSTEMS has acquired know-how and considerable experience over the years in the field of formalin security, to provide a complete solution guaranteeing precise diagnosis, quality and optimal safety for operators, from the pre-analytical phase in the post-analytical phase
YOUR SAFETY FIRST!
§ Safe filling of buckets with 4% buffered formalin, inside a completely closed and ventilated enclosure, guaranteeing the containment of vapors for the safety of users
§ Dispensing of formaldehyde disabled if the motorized front window of the work chamber is not closed
§ Lighting of the working area for the visual control of the filling level of the buckets
§ Filling canister located in the low ventilated cupboard with quick connector to avoid contact with formalin for the safety of users
§ Large touch screen displaying all Formolsafe parameters (ventilation, filtration, pump activation, alarms, etc.)
§ No specific consumables required
§ Filtration of formalin vapors before discharge to the outside (ED6185 INRS)
§ The FORMOLSAFE meets the needs of operating theaters that want a secure system for filling buckets containing samples with 4% buffered formalin, guaranteeing user safety.
§ The FORMOLSAFE makes it possible to fill rigid, standard buckets of all sizes, without the operator being subjected to fumes or contact with the fixer. The volume of formalin dispensed is controlled by the user.
§ To launch a filling program, simply place the container containing the sample inside the FORMOLSAFE enclosure. Once the motorized sliding window is in the closed position, the formalin dispensing pump activates and the dosing of the fixative can begin in complete safety.
§ The FORMOLSAFE uses standard containers available on the market or closed circuit cubitainers with a capacity of 10 or 20 liters.
FIXATION IN THE OPERATING ROOM WITH FORMOLSAFE
– Put the biological sample in the bucket adapted to its size
– Place the buckets in the work enclosure under the tap
– Closing of the motorized sliding window and activation of the formalin pump
– Press the pedal to start the formalin dosage inside the completely closed and ventilated enclosure
– Volume control thanks to the lighting of the work area
– Opening of the motorized sliding window with increased ventilation in order to maintain a minimum flow of 0.5 m/s at the level of the opening.
– Close the bucket with its lid
– Stick the tracking label on the bucket
– Place the bucket in a ventilated cabinet awaiting collection by the pathological anatomy laboratory
TECHNICAL FEATURES
- Safe filling of sample buckets with formalin
- Deactivation of the pump if the front motorized sliding window is not closed
- Activation of distribution by pedal
- Ventilated, closed and illuminated distribution enclosure
- Variation of the ventilation according to the opening of the front window to guarantee a flow of 0.5 m/s minimum at the level of the opening in the front
- Ventilated storage cupboard for formaldehyde canisters or cubitainers with sliding shelves such as retention bins
- Recovery tank under the perforated tray in case of accidental spillage, connected to a recovery canister with full canister level alarm located in the low ventilated cupboard
- Built-in carbon filter for aldehydes, optional HEPA filter
- Active suction during all phases of use of the instrument
- Large color touch screen to view all working parameters
- Connection tapping for discharge to the outside above the device D 200 mm
- In France, FORMOLSAFE requires connection to an external drain (ED6185 INRS).
- Equipped with a filter for formaldehyde and an extractor in the upper part
- No specific consumables required
- Ease of use
- Ease of installation and maintenance
- Small footprint W 750 x D 782 x H 2200 mm
Custom Design Grossing Workstations have been shipped successfully!
STAHLMED provides all of the business partners and customer custom design products wihich going to be 100% suitable for the project’s laboratories! Let’s design you own one which going to be suitable for your labs.
#GrossingWorkstation #MakroskopiKabini #GrossingStation #Grossing #Pathology #Pathologylabs #Pathologie #Zuschneidetisch #Patoloji
Grossing Workstation | WS-1100 HERA SERIES
Tailor-made Design,
A special designed #GrossingWorkstation that meets all of the needs for #Pathology #Labs.
316 #StainlessSteel Quality 1.5mm construction for working place which has effective resistance for #chemicals.
304 Stainless Steel Quality 1mm construction of rest
Large and effective working area with Perforated Grid Plates
#Downdraft & #Backdraft ventilation that keeps the user safe from inhaling chemicals during working
Ventilated base area
3 different #ventilation type availability which as;
-Recirculating Exhaust System
-External Exhaust System
-Remote Exhaust System
#Rinsing system that eliminates the collection of fluids within the downdraft
Long-Lasting Led Lights that provide the bright working facility.
Halogen Lamp options which provide you to take sample photos with the warm light.
TOUCH SCREEN CONTROLLED Operations
Foot Pedal Controlled Hot & Cold Water
Filter Control | Visual and Buzzer
#Formalin Waste Tank Operations ( Optional )
A ventilation system designed as a downdraft and backdraft which has regulated with a carbon filter that keeps away Formaldehyde Fumes from the user to provide a safe and healthy working place.
#GrossingStation #Pathology #Laboratory #StainlesssteelFurnitures #Pathologist #Zuschneidetisch #Makroskopi #Makcroscopie #Tabledemacroscopie #Formaldehyde #histology #anathomylab #Stahlmed #Stahlmedlab #Stahlmed #Laboratory
#GrossingWorkstation | A new installation in Morocco
A new Guillotine Glassed #GrossingWorkstation has been installed in Rabat.
For more information, contact our team to design your own Grossing Workstation.
#GrossingStation #StainlessSteel #Pathology #Laboratory
Fume Exhaust Hood has been shipped to Bangkok, Thailand!
Fume hood exhaust fans and Air extraction fume hoods are used as lab air ventilation systems that extract dangerous chemical fumes which is harmful to the health from the air inside laboratories.
GROSSING WORKSTATIONS and Various Stainless Steel Furnitures | Custom-Built has been shipped to France
GWS-500 Series, Custom-Built has been shipped to Poland! | Grossing Workstation – STAHLMED
Last Comments