TECHNICAL SPECIFICATION
- The tray of the device is able to cool down to -10 (+/- 1C) C.
- The cooling surface of the device is at least 60 blocks. This surface consist of a single area.
- The working area of the device is 40×30 cm.
- A Digital Screen added on the device and values can be monitored on this screen.
- The device has anti-vibration feet.
- Optionally, lamp can be placed on the cassette working surface.
- The device operates at 220 V -50 Hz.
- The device warranted internationally for 1 years against any malfunction.
Contact us to get more information.
info@stahlmed.com
Our MW-01 Stainless Steel model is produced upon order.
The production time is about 1 week. It is made of 304 quality stainless steel.
- Height / 86cm
- Width / 55cm
- Depth / 38cm
- Whole Surface / 304 stainless steel construction
- Sink / 33 cm stainless steel
- Water Capacity / 27 lt
- Castors with break
- Liquid Soap Dispenser / Yes
- Paper Towel Holder / Optional – Free
- Battery / Optional – ExtrasOptional;* 3-stage adjustable temperature
setting
And all of your extra need can be added to the unit.
Stahlmed MXSTH 571 – MXSTH 632 isa modern paraffin embedding station with microprocessor control system. It is designed for use in pathology laboratories and for embedding histological tissue samples only in molten paraffin for the following tasks:
• To embed the sample, melt the solid paraffin and keep the melted paraffin at the required temperature.
• Pour paraffin into embedded molds where the samples are placed.
- The device ensures that all existing applications are combined in paraffin embedding.
- The device can be controlled under the microprocessor control.
- The device can be one-piece or two-piece modular.
- The start time of the device can be programmed differently for each day of the week, thus saving energy.
- It has a large touch LCD screen that shows all data about the device and shows all data.
- The information in the menus opened on the screen can guide the user.
- The device is insulated against paraffin leaks.
- The device has a non-disposable mesh porous filter system to ensure that the wax used remains clean.
- The device has a large storage tank with a heater that can take at least 150 block molds.
- The device has a wide stainless steel tank with a capacity of at least 150 cassettes, which allows the storage of baskets from tissue tracking devices.
- The temperature of this section can be adjusted between 0 – 70 ºC (+/- 1ºC).The device has a paraffin tank with a capacity of at least 4 liters, which allows long working periods.
- The cold plate should be capable of holding at least 60 blocks, and this part can be cooled to 0 to -20 ° C.
- Hot plate can be adjusted between 0 – 70 ºC (+/- 1ºC).The temperature of the tissue burial molding chamber can be adjusted between 50-70ºC (+/- 1ºC).
- The temperature of the paraffin tank can be adjusted between 0 – 70 ºC (+/- 1ºC).The working table, cassette opening section and collet heater sections are designed to transfer extra paraffin to a single heated chamber through the channels.
- Waste paraffin can be discharged from this compartment.
- There are at least 4 heated collet places on the device and these places are made of stainless material.
- The device operates at 220 V, 50 Hz.Made in Turkey and one-to-one product exchange guaranteed
Lot’s of chemicals used in laboratories release fumes in storage. These can be harmful to health and create an odour nuisance for laboratory staff. Chemical Storage Cabinets such problems simply vanish with Filters and Ventilation Systems. These fumes effectively removed by continuous ventilation system and keep the laboratory from this hazadous fumes!
• Height adjustable shelves, pull-out shelves with removable plastic sump, bottom collecting sumps, perforated inserts and grids or railed shelves *Can be connected to a technical exhaust system.
• Adjustable ventilation operating range
• 304 or 316 Quality Stainless Steel contruction
• Lockable to prevent unauthorised access
• Clip-on hinges, opening angle 270°
• Optional integrated fan for active ventilation option configuration with external fan
• Custom Build Products designed according to your laboratory conditions
Features:
• 304 quality stainless steel construction
• Fully TIG Welded
• Shelf options
• Swivel castors with brakes
• Durable plastic bumpers against impacts
• Extra drawer options
- 304 Quality Stainless Steel construction
- Fully TIG welded
- Satenet Surface
- Glassed door options
- Custom Build is available
Model;
IDC-01-0001
IDC-01-XXXX Custom Build
- 304 Quality Stainless Steel construction
- Fully Tig Welded
- Satenet Surface
- Custom build is available
Contact us to get more information.
Model;
ESC-01-0001
ESC-01-XXXX, Custom Build
- 304 or 316 Quality Stainless Steel construction
- Selection of wheels which is suitable the floor where will be placed, as swivel castors with locking system
- Fully TIG welded
- Satenet Surface
- Custom Builed is available
Models
ANST-01-0001
ANST-01-XXXX , Custom Build
- 304 Quality Stainless Steel construction
- Fully TIG welded
- Satenet surface
- Custom build is available
Models
IWS-01-0001, Open Type, Single Sink
IWS-01-0002, Closed Type, Single Sink
IWS-01-0003,Open Type, Double Sink
IWS-01-0003, Closed Type, Double Sink
IWS-01-XXXX, Custom Build
Features:
• 304 quality stainless steel construction
• Adjustable hights
• Easy to use and suitable product which has designed considering to the needs during the operation
• Easy-to-move and durable legs
• Wheel options according the specifically choised for the surface with brakes
• Custom build is available
Last Comments